Skate Equipment
Skateboard Hardware
Bones Ceramic Super REDS™
The story of Ceramic Super REDS™ is simple. Take the superior steels used in our Super REDS™ and swap the steel balls for grade 5, silicone nitrade, hot isostatically pressed ceramic balls and you have Bones Ceramic Super REDS™.
Bones Ceramic Super REDS™ are lighter and provide faster acceleration because the balls weigh much less. They create less friction and are thus faster than Super REDS™, with or without lubricant! When you get dirt into your Ceramic Super REDS™, the ceramic balls will help to re-polish the steel races flat again, providing a self-healing benefit because ceramic balls are so much harder than steel. Finally, ceramic balls will not rust, further lengthening their life. Ceramic Super REDS™ use a bone colored shield with laser-engraved outer races for identification.
More Details
Features
* Features grade 5, silicone nitride, hot isostatically pressed ceramic balls.
* Higher quality steel races and a superior surface finish.
* Single non-contact removable rubber shield for easy cleaning and less friction.
* High speed nylon ball retainer for greater strength and speed.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Contents
* Set of 8 bearings
* Instructions
* Sticker
Bones REDS™
Bones REDS™ are manufactured in China to our Bones Skate Rated™ specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shiped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones Swiss performance at a fraction of the cost, they have become the best selling bearing brand in the U.S.A.
More Details
Features
* Single, non-contact, removable rubber shield for easy cleaning and less friction.
* High speed nylon ball retainer for greater strength and speed.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Contents
* Set of 8 bearings
* Instructions
* Sticker
Bones Super REDS™
Super REDS™ are designed from the ground up to be the best bearing on the market at this price point. What Super REDS™ are not is a REDS™ bearing with just better super finishing (surface polishing). Super REDS™ are a superior quality bearing, using higher quality steel races, better quality and grade balls, and a superior surface finish. The result is a bearing that is as fast as REDS™ but quieter, smoother, and longer lasting. Super REDS™ use a black shield and laser engraving to differentiate themselves from original REDS™.
More Details
Features
* Higher quality steel races, better quality and grade balls, and a superior surface finish.
* Single, non-contact, removable rubber shield for easy cleaning and less friction.
* Pre-lubricated with Speed Cream™ racing lubricant.
* High speed nylon ball retainer for greater strength and speed.
* Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Contents
* Set of 8 bearings
* Instructions
* Sticker
Bones® Super Swiss 6 Bearings
This unique design features six larger diameter balls instead of the seven balls used in most 608 bearings. The advantage of this design is higher speed, faster acceleration, greater strength and durability.
More Details
Features
* Single, non-contact, removable rubber shield allows for easy cleaning and less friction.
* High speed nylon ball retainer for greater strength and speed.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Contents
* Set of 8 bearings
* 4 bearing spacers
* Instructions
* Sticker
Bones® Swiss Bearings
Legendary Original Bones® Swiss bearings are the optimum combination of Bones Skate Rated™ design and Swiss precision manufacturing creating the standard by which all other bearings are measured. For more than 24 years preferred by the world’s top professional skaters. Proven, professional competition-grade speed and durability make Bones Swiss normally last several times as long as ordinary ABEC rated bearings.
More Details
Features
* Single, removable, non-contact rubber shield allows easy cleaning and low friction.
* High speed nylon ball retainer provides added strength and speed.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
* Best selling high end skate bearing in the U.S.A.
Contents
* Set of 8 bearings
* 4 bearing spacers
* Instructions
* Sticker
Bones® Swiss Ceramics Bearings
Bones Swiss Ceramics are in a class by themselves. If you want the best there is, this is it. The Cerbec® Ceramic balls are much lighter, harder, stronger, and longer lasting than the finest steel balls.
More Details
Features
* Accelerate faster.
* Roll faster and farther.
* Resist dirt and moisture better.
* Help to repair injuries to your races caused by dirt.
* High speed nylon ball retainer for greater strength and speed.
* Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
* Sticker
Contents
* Set of 8 bearings
* 4 bearing spacers
* Instructions
* Sticker
Bones® Swiss Labyrinth Bearings
This new bearing is similar to the original Bones® Swiss bearing, but with a redesigned inner race and two labyrinth seals to keep dirt out even better than before. Bones Labyrinth shields are non-contact, so that they do not increase friction, only the distance dirt particles must travel to get past the shields. The only difference you will notice is that the labyrinth shield Bones will last several times longer than the original Bones Swiss between cleanings. This significant increase in service life comes at a very small increase in retail cost, so the value is greatly increased.
More Details
Features
* Double labyrinth non-contact, removable rubber shields allow easy cleaning and low friction.
* High speed nylon ball retainer provides added speed and strength.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Contents
* Set of 8 bearings
* 4 bearing spacers
* Instructions
* Sticker
Skateboard Trucks
Gullwing Sidewinder Trucks
More Details
The patented design of the Gullwing Sidewinder Trucks have been turning heads since they were first introduced. What makes these trucks so special is that they have two pivot points which allows the trucks to turn twice as sharp and fast as a standard truck. This double action pivot allows the rider to generate speed using their own turning momentum. The Gullwing Sidewinder trucks are a sidewalk surfers dream. Ask anyone that has ridden them and the truth will be told.
***Please be aware that these trucks must be set up on an appropriately shaped deck with proper clearance in order to function properly and avoid wheel bite***
Skateboards
Sector Nine - Bamboo - Burleigh
More Details
Deck: 100% Bamboo Construction
Specs: 42.0" L x 9.5" W x 30.875" WB
Trucks: 10" Gullwing Charger
Wheels: 74mm/75a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Clear Grip Tape, Drop Through Bolt Pack
Sector Nine - Bamboo - Shipsterns
100% Bamboo Construction
More Details
Deck: 100% Bamboo Construction
Specs: 38.0" L x 9.375" W x 26.5" WB
Trucks: 9" Gullwing Charger
Wheels: 65mm/78a Biothane Soy Compound
Bearings: Abec 5 Greaseball Bearings
Hardware: Clear Grip Tape, 1.5" Bolt Pack, 5/16" Flat Risers
Sector Nine - Bamboo - Teahupoo
100% Bamboo Contruction
More Details
The Teahupoo pintail is a fast, smooth riding board. The deck features a "W" concave and mild camber to add to its strength while still allowing a nice amount of flex.
Deck: 100% Bamboo Construction
Specs: 46.0" L x 10.0" W x 32.5" WB
Trucks: 10.0" Gullwing Charger Trucks
Wheels: 70mm/75a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Clear Grip Tape, 1.5" Bolt Pack, 1/8" Shock Pad
Sector Nine - Cosmic - Coconut
More Details
Dimensions: 31.8` L x 8.125` W. The Coconut is a carving hybrid, made from a combination of 1-ply hard-rock Maple and 2-ply Bamboo. Light, durable and handles well if things pick up speed. Complete with 65mm/78a Top Shelf Nineball Wheels and Abec-5 bearings. 1.5" bolts, 1/4" Risers. Wheel base: 20.875"
Sector Nine - Cosmic - Greenroom
More Details
Deck: 4 Ply Maple - Fiberglass Wrap - Top & Bottom Graphic
Specs: 34.0" L x 8.25" W x 23.0" WB
Trucks: 8.375" Gullwing Mission
Wheels: 65mm / 78a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Clear Grit Riding Surface, 1.5" Bolt Pack, Angled Risers
Sector Nine - Cosmic - Lombok
More Details
Deck: 7 Ply Maple - Camber - Concave
Specs: 46.0" L x 9.5" W x 31.75" WB
Trucks: 9.0" Gullwing Alpine
Wheels: 70mm/78a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape w/ Die Cut Logo, 1.5" Bolt Pack, 5/16" Mini Risers
Sector Nine - Cosmic - Mainland
More Details
Deck: 4 Ply Maple - Fiberglass Wrap
Specs: 38.0" L x 8.5" W x 25.375" WB
Trucks: 8.375" Gullwing Mission
Wheels: 65mm/78a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape w/ Die Cut Logo, 1.5" Bolt Pack, Angeld Risers
Sector Nine - Cosmic - Pathfinder
More Details
Deck: 4 Ply Maple - Fiberglass Wrap
Specs: 38.0" L x 8.5" W x 25.375" WB
Trucks: 8.375" Gullwing Mission
Wheels: 65mm/78a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape w/ Die Cut Logo, 1.5" Bolt Pack, Angeld Risers risers.
Sector Nine - Deep End - Iron 9
More Details
Deck: 7 Ply Maple
Specs: 32.75" L x 8.8" W x 15.125" WB
Trucks: 149mm Independent
Wheels: 60mm/98a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape, 1.5" Bolt Pack, 5/16" Mini Risers
Sector Nine - Mini - Joel Tudor
More Details
Deck: 7 Ply Maple
Specs: 29.5" L x 8.6" W x 14.0" WB
Trucks: 149mm Independent Trucks
Wheels: 61mm/78a Top Shelf Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape w/ Die Cut Logo, 1.5" Bolt Pack, 5/16" Mini Risers
Sector Nine - OG - Luke
More Details
Deck: 9 Ply Maple
Specs: 55.0" L x 11.0" W x 34.75" WB
Trucks: 10.0" Gullwing Alpine or Charger
Wheels: 61mm/78a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape w/ Die Cut Logo, 2.0" Bolt Pack, 5/16" Mini Risers
Sector Nine - OG - Oracle
More Details
Deck: 9 Ply Maple
Specs: 55.0" L x 11.0" W x 34.75" WB
Trucks: 10.0" Gullwing Alpine or Charger
Wheels: 61mm/78a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape w/ Die Cut Logo, 2.0" Bolt Pack, 5/16" Mini Risers
Sector Nine - Platinum - 9 Star
More Details
There's a new sheriff in town and he's riding the new "9 Star" top mount.
Deck: 39.0" x 9.5" - 8 ply concave maple - Top Mount
Trucks: 10" Gullwing Charger Trucks
Wheels: 74mm / 78a Nineball Wheels
Hardware: Full Grip Tape - 1.5" Bolt Pack
Sector Nine - Platinum - BHNC
More Details
Deck: 8 Ply Maple
Specs: 46.0" L x 10.0" W x 34.75" WB
Trucks: 10.0" Gullwing Charger Trucks
Wheels: 70mm/78a Top Shelf Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware Full Grip Tape w/ Die cut for logo, 1.5" Bolt Pack, 1/8" Shock Pad
Sector Nine - Platinum - Carbonite
More Details
Deck: 5 Ply Maple - Carbon Fiber/Fiberglass - Drop Through Top Mount
Specs: 41.0" L x 9.25" W x 31.125" WB
Trucks: 10.0" Gullwing Charger Trucks
Wheels: 74mm / 78a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware Full Grip Tape w/ Die cut for logo, Custom Bolt Pack
Sector Nine - Platinum - Joel Tudor
More Details
Deck: 7 Ply Maple
Specs: 38.3" L x 8.75" W x 27.375" WB
Trucks: 9.0" Gullwing Charger Trucks
Wheels: 65mm/75a Top Shelf Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware Full Grip Tape w/ Die cut for logo, 1.5" Bolt Pack, 1/4" Flat Risersers, Wheels - 65mm 78a top-shelf nineballs, Hardware - 1.5" bolts, 1/4" Risers
Sector Nine - Sidewinder - Reflections
More Details
Deck: 4 Ply Maple - Fiberglass Wrap
Specs: 33.5" L x 8.0" W x 27.25" WB
Trucks: Gullwing Sidewinder
Wheels: 69mm/80a Nineball Wheels
Bearings: Abec 5 Greaseball Bearings
Hardware: Full Grip Tape w/ Die Cut Logo, 1.5" Bolt Pack, 9/16" Flat Risers
Updating...
Facebook
Twitter
RSS
