If you have large rips or tears or a tear that’s along a seam or stress point, you should stitch up the cut first using
1. Clean and dry the suit.
*You can put a plastic bag behind the tear to prevent the glue from sticking to the wrong part of the suit.
2. Using your brush or the one provided in the can of wetsuit cement, coat both sides of the newly sewn rip with neoprene cement to make it watertight.
3. Hold the two sides apart and allow the glue to dry for 24 hours. (Don’t stick together yet)
4. Apply a second coat of glue and let it dry for a few minutes.
5. Squeeze the two sides together and let it set for 24 hours before using.
*Be careful to line both side up as accurately as possible.
Small Cuts
Just clean the suit and glue like above without stitching the suit first.
After spending some time in the lab, Mr. Zog, and a couple artists from Santa Barbara known as the Anderson Brothers have come up with a surf wax sculpture known as the “Sexy Skull”
To get your own Sexy Skull head check the Anderson Brothers website for more info.
Loading ...